A three‐dimensional cadmium coordination polymer based on 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene and benzene‐1,3,5‐tricarboxylic acid

The Cd^II three‐dimensional coordination poly[[[μ₄‐1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene]bis(μ₃‐5‐carboxybenzene‐1,3‐dicarboxylato)dicadmium(II)] dihydrate], {[Cd₂(C₉H₄O₆)₂(C₈H₁₀N₆)]·2H₂O}_n , (I), has been synthesized by the hydrothermal reaction of Cd(NO₃)₂·4H₂O, benzene‐1,3,5‐tricarboxylic acid (1,3,5‐H₃BTC) and 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene (1,4‐btbe). The IR spectrum suggests the presence of protonated carboxylic acid, deprotonated carboxylate and triazolyl groups. The purity of the bulk sample was confirmed by elemental analysis and X‐ray powder diffraction. Single‐crystal X‐ray diffraction analysis reveals that the Cd^II ions adopt a five‐coordinated distorted trigonal–bipyramidal geometry, coordinated by three O atoms from three different 1,3,5‐HBTC²⁻ ligands and two N atoms from two different 1,4‐btbe ligands; the latter are situated on centres of inversion. The Cd^II centres are bridged by 1,3,5‐HBTC²⁻ and 1,4‐btbe ligands into an overall three‐dimensional framework. When the Cd^II centres and the tetradentate 1,4‐btbe ligands are regarded as nodes, the three‐dimensional topology can be simplified as a binodal 4,6‐connected network. Thermogravimetric analysis confirms the presence of lattice water in (I). Photoluminescence studies imply that the emission of (I) may be ascribed to intraligand fluorescence.     

电感耦合等离子体原子发射光谱(ICP-AES)法测定锡铅焊料中11种微量元素

根据目前市场上常见锡铅焊料中主元素的特性(锡含量范围0.X%~95%,铅含量范围X%~99%),合理选择了有效的样品前处理方法。参考铸造锡铅焊料牌号及化学成分和仪器工作条件,确定了待测元素的测定范围。应用电感耦合等离子体原子发射光谱法同时测定锡铅焊料中锑、铋、铁、砷、铜、银、锌、铝、镉、磷、金11种元素的含量,方法操作简单。选择了合适的分析谱线,进行了基体元素对待测元素以及各待测元素之间的干扰研究,基体效应小,各待测元素之间基本无干扰,11次独立的测定数据相对标准偏差为1.0%~11.3%,方法的加标回收率为90.2%~105%。完全能满足现实生产中对锡铅焊料杂质元素的测定要求。     

非单C~*-代数α-比较性的等价刻画

给出非单C~*-代数α-比较性的等价刻画:当每个τ∈QT(■H)均为忠实时,■具有α-比较性,当且仅当对于任意的〈a〉,〈b〉∈Cu(■)且∝,若α·d_τ(a)≤在Cu(■)中成立;一般地,当QT(■H)≠Φ时,■具有α-比较性,当且仅当对于任意的,∈Cu(■),若存在η>0,使得d_τ(α)≤(α~(-1)-η)d_τ(b)(_τ∈QT(■H)),则≤在Cu(■)中成立.     

Proximal-gradient algorithms for fractional programming

In this paper, we propose two proximal-gradient algorithms for fractional programming problems in real Hilbert spaces, where the numerator is a proper, convex and lower semicontinuous function and the denominator is a smooth function, either concave or convex. In the iterative schemes, we perform a proximal step with respect to the nonsmooth numerator and a gradient step with respect to the smooth denominator. The algorithm in case of a concave denominator has the particularity that it generates sequences which approach both the (global) optimal solutions set and the optimal objective value of the underlying fractional programming problem. In case of a convex denominator the numerical scheme approaches the set of critical points of the objective function, provided the latter satisfies the Kurdyka-?ojasiewicz property.     

Certain properties related to well posedness of switching diffusions

This work is devoted to switching diffusions that have two components (a continuous component and a discrete component). Different from the so-called Markovian switching diffusions, in the setup, the discrete component (the switching) depends on the continuous component (the diffusion process). The objective of this paper is to provide a number of properties related to the well posedness. First, the differentiability with respect to initial data of the continuous component is established. Then, further properties including uniform continuity with respect to initial data, and smoothness of certain functionals are obtained. Moreover, Feller property is obtained under only local Lipschitz continuity. Finally, an example of Lotka–Volterra model under regime switching is provided as an illustration.     

聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)的制备与性能

采用熔融酯交换和缩聚两步法,合成了以1,4-丁二醇、4,8-三环[5.2.1.0(2,6)]癸烷二甲醇和碳酸二苯酯为原料的聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)(PBTCx, x为进料中TCD占二元醇总量的百分比)。用1H NMR和13C NMR对PBTCs的微观结构和组成进行了表征。采用GPC、 DSC、 XRD、 TG对PBTCs的分子量、玻璃化转变温度(Tg)、热稳定性等进行了研究。结果表明,PBTCs的Mw为10500~124800 g?mol-1, Mn为6300~73000 g?mol-1, PDI为1.59~1.73; PBTCs呈无定形态、Tg为-3.43 ℃~70.90 ℃, PBTCs表现出比PBC更高的热稳定性。薄膜拉伸试验结果表明,PBTC30(拉伸强度为33.54 MPa,断裂伸长率为275.69%)和PBTC40(拉伸强度为32.13 MPa,断裂伸长率为294.63%)具有较高的强度和韧性,在薄膜材料中具有一定的应用潜力。     

Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: A viable waste management approach

The recycling and recovery of important materials from inexpensive feedstock has now become an intriguing area and vital from commercial and environmental viewpoints. In the present work, extraction of different single phases of alumina (α, γ, θ-Al₂O₃) having high purity (>99.5 %) from locally available waste beverage cans (～95 % Al) through facile precipitation route calcined at distinct temperatures has been reported. The optimization of process technology was done by a variety of different synthesis parameters, and the production cost was estimated between 84.47-87.45 USD per kg of alumina powder. The as prepared alumina fine particles have been characterized using different sophisticated techniques viz. TG-DTA, WD-XRF, XRD, FT-IR, SEM, DLS-based particle size analysis (PSA) with zeta (ζ) potential measurement and UV–Visible Spectroscopy. X-ray diffractogram confirms the formation of γ-, θ-, and α-alumina at 500–700 °C, 900–1000 °C, and 1200 °C respectively and crystallite size, crystallinity, strain, dislocation density, and specific surface area were measured using major X-ray diffraction peaks which varies with temperature. The SEM studies showed that the as prepared alumina particles were agglomerated, irregular-shaped with particle size (0.23–0.38 µm), pore size, and porosity were calculated from SEM image. ζ-potentials at different pH values as well as isoelectric point (IEP) of α, γ, and θ alumina were calculated in an aqueous medium which changes with temperature. The direct band gap (E_g) energies were found between 4.09 and 5.19 eV of alumina obtained from different calcination temperatures. The synthesized materials can be used in sensors, ceramics, catalysis, and insulation applications.     

碳酸酯类电解液中Mg(NO3)2添加剂抑制锂枝晶生长的研究

在锂-硫化聚丙烯腈电池体系中,负极锂枝晶的形成和生长严重恶化了电池充放电性能,并给电池带来了安全隐患。而在更有利于稳定正极硫化聚丙烯腈材料的碳酸酯类电解液中,锂枝晶生长尤为严重。本文通过将硝酸镁添加到碳酸酯类电解液中,研究硝酸根和镁离子对锂金属表面改性的共同作用。实验数据发现,在硝酸根和镁离子共同作用下,锂枝晶生长被有效抑制。当硝酸镁浓度为100 mmol·L^-1时,锂铜半电池的库仑效率明显提高,并显著改善了锂-硫化聚丙烯腈电池的循环性能。300次循环后容量保持率为71%,远高于硝酸锂的61%和无添加剂的50%。